Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
Example
console(config)# interface range gi1/0/1-20
description
Use the description Interface Configuration (Ethernet, Port-channel) mode
command to add a description to an interface. Use the no form of this
command to remove the description.
Syntax
string
description
no description
Parameters
string—Specifies a comment or a description of the port to assist the user.
(Length: 1–64 characters)
Default Configuration
The interface does not have a description.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
Example
The following example adds the description 'SW#3' to gigabitethernet port
1/0/5.
Console(config)#
gigabitethernet 1/0/5
interface
Console(config-if)#
SW#3
description
speed
Use the speed Interface Configuration (Ethernet, Port-channel) mode
command to configure the speed of a given Ethernet interface when not
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
330
Ethernet Configuration Commands
Advertisement
Table of Contents
