Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
User Guidelines
Use the storm-control broadcast enable Interface Configuration command to
enable storm control.
The calculated rate includes the 20 bytes of Ethernet framing overhead
(preamble+SFD+IPG).
Example
console(config)# interface gigabitethernet 1/0/1
console(config-if)# storm-control broadcast level kbps 12345
storm-control include-multicast
Use the storm-control include-multicast Interface Configuration mode
command to count multicast packets in the broadcast storm control. Use the
no form of this command to disable counting of multicast packets in the
broadcast storm control.
Syntax
storm-control include-multicast
no storm-control include-multicast
Parameters
Default Configuration
Disabled
Command Mode
Interface Configuration mode (Ethernet)
User Guidelines
Example
console(config)# interface gigabitethernet 1/0/1
console(config-if)# storm-control include-multicast
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
349
Ethernet Configuration Commands
Advertisement
Table of Contents
