Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Clock.fm
sntp unicast client poll
The sntp unicast client poll Global Configuration mode command enables
polling for the Simple Network Time Protocol (SNTP) predefined unicast
clients. Use the no form of this command to disable the polling for the SNTP
client.
Syntax
sntp unicast client poll
no sntp unicast client poll
Default Configuration
Polling is disabled.
Command Mode
Global Configuration mode
User Guidelines
Polling time is configured with the sntp client poll timer Global
Configuration mode command.
Example
The following example enables polling for SNTP predefined unicast clients.
Console(config)#
sntp unicast client poll
sntp server
The sntp server Global Configuration mode command configures the device
to use the Simple Network Time Protocol (SNTP) to request and accept
Network Time Protocol (NTP) traffic from a specified server. Use the no form
of this command to remove a server from the list of SNTP servers.
Syntax
ipv4-address
ipv6-address
ipv6z-address
hostname
poll
sntp server {
|
|
|
} [
]
key keyid
[
]
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
119
Clock Commands
Advertisement
Table of Contents
