Dell PowerConnect PC5524 Reference Manual page 130

Table of Contents

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax

Use the copy

from a network server to the running device configuration file. The

commands in the loaded configuration file are added to those in the running

configuration file as if the commands were typed in the command-line

interface (CLI). The resulting configuration file is a combination of the

previous running configuration and the loaded configuration files, with the

loaded configuration file taking precedence.

Copying a Configuration File from a Server to the Startup Configuration

Use the copy

from a network server to the device startup configuration file. The startup

configuration file is replaced by the copied configuration file.

Storing the Running or Startup Configuration on a Server

Use the copy running-config

configuration file to a network server using TFTP , .

Use the copy startup-config

configuration file to a network server.

Saving The Running Configuration To The Startup Configuration

Use the copy running-config startup-config command to copy the running

configuration to the startup configuration file.

-Backing Up the Running Configuration or Startup Configuration to a

Backup Configuration file

Use the copy running-config

configuration to a backup configuration file.

Use the copy startup-config

configuration to a backup configuration file.

The following example copies system image file1 from the TFTP server

172.16.101.101 to a non-active image file.

Accessing file 'file1' on 172.16.101.101...

D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY

Configuration/Image File Commands

CLI\files\Configuration_Image.fm

running-config command to load a configuration file

startup-config command to copy a configuration file

destination-url

command to back up the running

command to back up the startup

//172.16.101.101/file1

command to copy the current

command to copy the startup