Show Ip Dhcp Relay - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
You can use the command regardless if DHCP Relay is enabled on the
interface.
Example
The following example defines the DHCP server on VLAN 21.
Console(config)#
Console(config-if)#

show ip dhcp relay

Use the show ip dhcp relay EXEC mode command to display the server
addresses on the DHCP relay.
Syntax
show ip dhcp relay
Command Mode
EXEC mode
Example
The following example displays the server addresses on the DHCP relay.
Console>
show ip dhcp relay
DHCP relay is globally enabled.
DHCP relay is enabled on VLANs: 1, 2
DHCP relay is enabled on ports: 1/1
DHCP relay is enabled on port-channels:
Servers: 172.16.1.11, 172.16.8.11
Console>
show ip dhcp relay
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
654
DHCP Relay Commands
CLI\files\DCHP_Relay.fm
interface vlan
ip dhcp relay address
21
176.16.1.1