Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
User Guidelines
Static multicast addresses can only be defined on static VLANs.
You can execute the command before the VLAN is created.
You can register an entry without specifying an interface.
Using the no. command without a port-list removes the entry.
Example
console(config)# ip igmp snooping vlan 1 static 239.2.2.2
ip igmp snooping multicast-tv
Use the ip igmp snooping multicast-tv Global Configuration mode
command to define the multicast ip-addresses that are associated with a
multicast-tv VLAN. Use the no form of this command to remove all
associations.
Syntax
ip igmp snooping
number]
no ip igmp snooping
number]
Parameters
•
vlan-id—Specifies the VLAN
•
number—Configures multiple contiguous multicast IP addresses. If not
specified, the default is 1. (Range: 1–256)
Default
No multicast IP address is associated.
Command Mode
Global Configuration mode
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
528
IGMP Snooping Commands
CLI\files\IGMP_Snooping.fm
vlan vlan-id
multicast-tv
vlan vlan-id
multicast-tv
ip-multicast-address [count
ip-multicast-address [count
gi1/0/
Advertisement
Table of Contents
