Snmp-Server Engineid Remote - Dell PowerConnect PC5524 Reference Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
As the EngineID should be unique within an administrative domain, the
following guidelines are recommended:
• For standalone devices, use the default keyword to configure the Engine
ID.
• For stackable systems, configure an EngineID, and verify that it is unique
within the administrative domain.
Changing or removing the value of snmpEngineID deletes the SNMPv3
users database.
The SNMP EngineID cannot be all 0x0 or all 0xF or 0x000000001
Example
The following example enables SNMPv3 on the device and sets the device
local engine ID to the default value.
Console(config)#

snmp-server engineID remote

To specify the Simple Network Management Protocol (SNMP) engine ID of a
remote SNMP device, use the snmp-server engineID remote Global
Configuration mode command. Use the no form of this command to remove
the configured engine ID.
Syntax
snmp-server engineID remote
string
no snmp-server engineID remote
Parameters
• ipv4-ip-address | ipv6 address—Pv4 or IPv6 address of the remote device
engineid-string—The character string that identifies the engine ID. The
•
engine ID is a concatenated hexadecimal string. Each byte in hexadecimal
character strings is two hexadecimal digits. Each byte can be separated by
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
172
SNMP Commands
CLI\files\SNMP.fm
snmp-server engineID local default
{ipv4-ip-address | ipv6 address} engineid-
{ipv4-ip-address | ipv6 address}