Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Syntax
qos wrr-queue threshold
no qos wrr-queue threshold
Parameters
•
gigabitethernet—Specifies that the thresholds are to be applied to Gigabit
Ethernet ports.
•
queue-id—Specifies the queue number to which the tail-drop threshold is
assigned.
•
threshold-percentage—Specifies the queue threshold percentage value.
Default Configuration
The default threshold is 80 percent.
Command Mode
Global Configuration mode
User Guidelines
If the threshold is exceeded, packets with the corresponding DP are dropped
until the threshold is no longer exceeded.
Example
The following example assigns a threshold of 80 percent to WRR queue 1.
Console(config)#
qos map policed-dscp
Use the qos map policed-dscp Global Configuration mode command to
configure the policed-DSCP map for remarking purposes. Use the no form of
this command to restore the default configuration.
Syntax
qos map policed-dscp
no qos map policed-dscp [
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\QoS.fm
gigabitethernet queue-id threshold-percentage
gigabitethernet queue-id
qos wrr-queue threshold
dscp-list to dscp-mark-down
dscp-list
]
Quality of Service (QoS) Commands
gigabitethernet
1 80
749
Advertisement
Table of Contents
