Rep 5.1.1 Erase Lamp - Xerox DocuColor 12/DCCS50 Service Manual

REP 5.1.1 Erase Lamp

Parts List on PL 5.1
Removal
Turn power off and disconnect the power plug.
NOTE: When removing the Drum Unit, do not expose the Drum to direct sunlight or strong
light.
NOTE: Do not touch the Drum surface.
1. Remove the Drum Unit (REP 5.3.1).
2. Remove the Erase Lamp (Figure 1).
1. Disconnect the connector.
2. Remove the Erase Lamp.
Figure 1 Remove the Erase Lamp
Reissue
DocuColor 12/DCCS50
WARNING
Installation
NOTE: When installing the Erase Lamp, match the rails (on both sides of the Erase Lamp) with
groove A (Figure 2).
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-67
Figure 2 Reassembly
Repairs and Adjustments
REP 5.1.1