Rep 3.5.1 Ips Chassis - Xerox DocuColor 12/DCCS50 Service Manual

Figure 3 Removing the Lamp Wire Harness
Installation
1. Reinstall the parts in the reverse order of disassembly.
NOTE: After reinstalling the parts, adjust the positions of the Full Rate/Half Rate Carriages
(ADJ. 3.4.1).
Reissue
DocuColor 12/DCCS50

REP 3.5.1 IPS Chassis

Parts List on PL 3.5
Removal
Turn power off and disconnect the power plug.
The IPS chassis is heavy (16lb.). Take care to avoid injury when handling the IPS chassis.
1. Remove the Right Upper Cover
2. Remove the IIT Rear Cover (PL 11.3 Item
3. Disconnect the connectors at the right side of the IPS chassis
1. Remove the screws (2).
2. Remove the connector cover.
3. Disconnect the connectors (3).
Figure 1 Disconnecting the Connectors
4. Disconnect the connectors in the rear side of the IPS chassis
1. Release the clamp.
2. Disconnect the connectors (5).
1/05
4-63
WARNING
CAUTION
(PL 11.2 Item 1).
15).
(Figure 1).
(Figure 2).
Repairs and Adjustments
REP 3.4.2, REP 3.5.1