Moving The Sensor; Removing The Tray 1 Feedout Sensor And T/A Sensor - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Moving the Sensor
4. Remove the Tray 1 Feedout Sensor and T/A Sensor
1. Remove the screws (2).
2. Disconnect the connector.
3. Remove the sensors (2).
Reissue
DocuColor 12/DCCS50
(Figure 3).
1/05
4-25
Figure 3 Removing the Tray 1 Feedout Sensor and T/A Sensor
Installation
1. Reinstall the parts in the reverse order of disassembly.
Repairs and Adjustments
REP 2.8.1