Xerox DocuColor 12/DCCS50 Service Manual page 405

Figure 4 Lock the Rotary Latch Lever
4. Install the Rotary Latch Lever (Figure
1. Push the Rotary Latch Lever in the direction of the arrow.
2. Fasten the screws (2).
Reissue
DocuColor 12/DCCS50
5).
Figure 5 Install the Rotary Latch Lever
5. Remove the Locating Pin and return it to its storage position.
6. After installation, check the gear play. Manually lock and release the solenoid. Make sure
that the solenoid is properly locked.
Ensure that the Locating Pin is removed before attempting to run the machine.
1/05
4-81
CAUTION
Repairs and Adjustments
REP 6.1.3