Table of Contents
Advertisement
Figure 3 Add the Developer
6.
Make sure that the Development Housing hook is not up on the Upper Cover
Reissue
DocuColor 12/DCCS50
(Figure
4).
7.
Restore the machine.
8.
Make 10 copies of the Test Pattern (82E10810) to mix the Developer in the following
mode:
a.
11" x 17" or A3 and 4-color mode (full color)
b.
10 sheets
9.
Perform the MAX Set Up
NOTE: After performing MA Set Up, go to IQ47 ATC Sensor RAP,
cedure.
1/05
4-91
Figure 4 Position the Hook
(ADJ
9.1.1).
Appendix 1. ATC set-up pro-
Repairs and Adjustments
REP 6.6.2
Advertisement
Table of Contents
Troubleshooting
