Rep 12.2.2 Registration Gate Solenoid; Rep 12.3.1 Left/Right Counter Balance - Xerox DocuColor 12/DCCS50 Service Manual

REP 12.2.2 Registration Gate Solenoid

Parts List on PL 12.2
Removal
Turn power off and disconnect the power plug.
1. Remove the Front Cover (PL 12.1).
2. Remove the Registration Gate Solenoid
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
3. Loosen the screws (2).
4. Remove the Registration Gate Solenoid.
Figure 1 Remove the Registration Gate Solenoid
Installation
1. Reinstall the parts in the reverse order of disassembly.
Repairs and Adjustments
REP 12.2.2, REP 12.3.1
WARNING
(Figure 1).

REP 12.3.1 Left/Right Counter Balance

Parts List on PL 12.3
Removal
Turn power off and disconnect the power plug.
The DADF is heavy (37.5lbs). Take care to avoid injury when handling the DADF.
1. Remove the DADF (REP
2. Remove the Rear Cover
3. Remove the Left Counter Balance
1. Remove the screws (4).
2. Remove the Left Counter Balance.
Figure 1 Remove the Left Counter Balance
4. Remove the Right Counter Balance
1. Remove the screws (4).
2. Remove the fastening terminals (2).
3. Remove the Right Counter Balance.
1/05
4-156
manuals4you.com manuals4you.com
WARNING
WARNING
12.1.1).
(PL 12.1).
(Figure 1).
(Figure 2).
Reissue
DocuColor 12/DCCS50