4.
Disconnect the connector
(Figure
2).
1. Loosen the screws (2).
2. Disconnect the connector.
3. Release the clamps (2) and remove the wire.
4. Pull out the connector from the hole.
Figure 2 Disconnect the Connector
5.
Hook the bracket hooks (2) as shown in the figure below
1. Hook the bracket hooks (2).
Repairs and Adjustments
ADJ 6.6.1
6.
(Figure
3).
1/05
4-194
manuals4you.com
manuals4you.com
Figure 3 Hook the Bracket Hooks
Remove the plate
(Figure
4).
1. Remove the screws (2).
2. Remove the plate.
Reissue
DocuColor 12/DCCS50