dC933 VH/VM Setup
Purpose
Sets the VG, LD light amount, Development Bias and ASG Bias output value by determining:
•
The VG value wherein the Drum surface potential becomes the target VH in two different
VGs.
•
The LD light that is the target VM in three different LD light amounts.
•
The ASG Bias to correct the high light unit.
NOTE: For details on dC933 VH/VM Setup, see Adjustments Section 4:
Setup (dC933).
Reissue
DocuColor 12/DCCS50
dC934 ADC/AGC Setup
Purpose
Automatically adjusts the ADC Sensor Gain.
•
Adjusts the ADC Sensor Gain and automatically sets the gain so that the Vclean within
the range is obtained.
•
At the same time, measures the Vclean irregularity (Vclean P-P) for one belt circumfer-
ence.
NOTE: For details on dC934 ADC/AGC Setup, see Adjustment Section 4:
ADJ 9.1.4
VH/VM
AGC Setup (dC934).
1/05
6-129
dC933 VH/VM Setup, dC934 ADC/AGC Setup
ADJ 9.1.3
ADC/
General Procedures