Rep 1.4.1 Belt (2Nd Btr, Auger) - Xerox DocuColor 12/DCCS50 Service Manual

Figure 5 Removing the Belt
Installation
1. Reinstall the parts in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50

REP 1.4.1 Belt (2nd BTR, Auger)

Parts List on PL 1.4
Removal
Turn the power off and disconnect the power plug.
1. Remove the IOT Rear Cover (PL 11.3 Item
2. Remove the Toner Waste Bottle.
3. Open the IOT Control PWB Chassis
4. Remove the Flywheel and flange
1. Remove the screws (2).
2. Remove the Flywheel.
3. Loosen the screws (2).
4. Remove the flange.
Figure 1 Removing the Waster Toner Auger
5. Remove the Waster Toner Auger
6. Remove the Main Motor (Figure
1. Disconnect the connectors (2).
2. Remove the screws (4).
1/05
4-5
WARNING
7)
(REP 9.2.1).
(Figure 1).
(REP 5.5.1).
2).
Repairs and Adjustments
REP 1.3.1, REP 1.4.1