REP 12.5.3 Set Gate Solenoid
Parts List on
PL 12.5
Removal
Turn power off and disconnect the power plug.
1.
Remove the Document Feed Lower Chute
2.
Remove the Set Gate Solenoid
(Figure
1. Disconnect the connector.
2. Release the clamp and remove the wire.
3. Loosen the screws (2).
4. Remove the Set Gate Solenoid.
Figure 1 Remove the Set Gate Solenoid
Installation
1.
Install the Set Gate Solenoid by inserting the pin into the gate
Repairs and Adjustments
REP 12.5.3
WARNING
(REP
12.5.1).
1).
(Figure
2).
Figure 2 Install the Set Gate Solenoid
2.
Install and lock the Set Gate Solenoid by pressing it in the direction of the arrow
1/05
4-164
manuals4you.com
manuals4you.com
(Figure
3)
Reissue
DocuColor 12/DCCS50