Rep 6.7.2 Trickle Auger - Xerox DocuColor 12/DCCS50 Service Manual

REP 6.7.2 Trickle Auger

Parts List on PL 6.7
Removal
Turn power off and disconnect the power plug.
1. Open/close the IOT Control PWB Chassis
2. Remove the Flywheel (REP 1.3.1), (See
3. Remove the bracket (Figure 1).
1. Remove the screws (5).
2. Remove the bracket.
Figure 1 Remove the Bracket
4. Remove the Rotary Developer Duct
5. Disconnect the connector (Figure 2).
1. Disconnect the connectors (2).
Repairs and Adjustments
REP 6.7.2
WARNING
(REP 9.2.1).
Figure 1).
(PL 10.2 Item 4)
Figure 2 Remove the Rotary Developer Duct
6. Remove the bracket (Figure
1. Loosen the screw.
2. Remove the spring.
3.Remove the screws (2).
4. Remove the bracket.
1/05
4-96
manuals4you.com manuals4you.com
3).
DocuColor 12/DCCS50
Reissue