Rep 12.9.1 Exit Motor - Xerox DocuColor 12/DCCS50 Service Manual

REP 12.9.1 Exit Motor

Parts List on PL 12.9
Removal
Turn power off and disconnect the power plug.
1. Remove the Rear Cover (PL 12.1).
2. Remove the Exit Motor (Figure 1).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
3. Loosen the screws (2).
4. Remove the belt.
5. Remove the Exit Motor.
Figure 1 Remove the Exit Motor
Installation
1. Install and lock the motor by pressing it in the direction of the arrow
Repairs and Adjustments
REP 12.9.1
WARNING
(Figure
2. Reinstall the remaining parts in the reverse order of disassembly.
2).
1/05
4-172
manuals4you.com manuals4you.com
Figure 2 Install the Exit Motor
DocuColor 12/DCCS50
Reissue