Rep 3.1.2 Iit Opening/Closing - Xerox DocuColor 12/DCCS50 Service Manual

Table of Contents

Advertisement

REP 3.1.2 IIT Opening/Closing

Parts List on
PL 3.1
Removal
Ensure that Tag 8, IIT Support Weld Brace Kit, is installed before the following removal proce-
dure is performed.
Turn power off and disconnect the power plug.
NOTE: Remove the DADF if the unit is so equipped.
1.
Remove the following parts:
a.
IIT Left Cover
(PL 11.3 Item
16)
b.
Right Upper Cover
(PL 11.2 Item
2.
Slide the Control Panel toward the front (see
3.
Remove the stopper
(Figure
1).
1. Remove the screws (2).
2. Remove the stoppers (2)
Figure 1 Removing the Stoppers
4.
Disconnect the connectors
(Figure
Repairs and Adjustments
REP 3.1.2
CAUTION
WARNING
(REP
12.1.1).
1)
Figure 1
of
REP
9.5.1).
2).
1. Disconnect the connectors (2).
2. Remove screw
Figure 2 Disconnecting the connectors
5.
Open the IIT
(Figure
3).
1. Remove the screw.
2. Open the IIT
3. Insert the brace into the hole.
4. Lock the screw removed in step 5.1.
1/05
4-52
manuals4you.com
manuals4you.com
Reissue
DocuColor 12/DCCS50

Advertisement

Table of Contents
loading

Table of Contents