15-361 POST IPS PWB Fail (Self Test) RAP
The POST IPS PWB I/O Port reported an error at power on.
Initial Actions
•
Refer to BSD 6.7 in the following procedure.
•
Procedure
PO/PO the copier/printer. If the error code persists, replace the Post IPS PWB
Reissue
DocuColor 12/DCCS50
15-362 X Hard Fail RAP
Communication Failure between the Pre IPS PWB and the BR PWB.
Initial Actions
•
Refer to BSD 6.7 in the following procedure.
•
Ensure that
P/J560
•
Ensure that the connection at the BR PWB has not been tampered with.
•
Ensure that the BR PWB mounting screws are tight.
(PL
3.5)
Procedure
Reseat the BR PWB. If the problem continues, replace the following:
•
BR PWB
(PL
3.5)
•
Pre IPS PWB
1/05
15-361 POST IPS PWB Fail (Self Test) RAP, 15-362
2-221
in the BR PWB and the Pre IPS PWB are firmly connected.
(PL
3.5)
Status Indicator RAPs