Dc391 Edit Pad; Dc612 Color Test Pattern Print - Xerox DocuColor 12/DCCS50 Service Manual

dC391 Edit Pad

Purpose
This routine allows you to set custom colors easily for the Customer Color Palette. Once a color
is selected the Color Indices can be adjusted by percentage to obtain the custom color for a
specific color.
NOTE: The numbered locations on the dC391Color Palette match the colored locations on the
Customer Color Palette.
NOTE: The Edit Pad feature must be selected on the
Edit Pad.
Procedure
1. Enter the Service Diagnostics Mode. Refer to
using the PWS.
2. Select Adjustments on the "Service Entry Screen."
3. Select Edit Pad (dC391). The Edit Pad Screen is displayed.
4. Select the number on the Color Palette that corresponds to the Customer Color Palette.
5. Once the color is selected, Click and drag the slide bars in the Color Indices box to
obtain the Custom Colors or click the arrow right of the slide bar to increase and click the
left arrow to decrease.
6. Select Save to save the changes.
7. Select Reset to restore the original settings prior to entering dC Edit Pad.
Reissue
DocuColor 12/DCCS50
dC371 Configuration Page to enable the
Entering the Service Diagnostic Mode

dC612 Color Test Pattern Print

Purpose
Prints the test pattern in the machine, to help identify Copy Quality problems.
Procedure
1. Enter the Service Diagnostics Mode. Refer to
using the PWS.
2. Select Diagnostics in the Service Entry Screen.
3. Select Test Pattern (dc612).
a. To print an "Image Process System Test Pattern", select Image Process System:
i. Select the Pattern Number from the menu.
ii. Select the Paper Tray.
iii. Set the number of prints to output in the "Print Count Box" and select Start.
b. To print the "Image Output Test Pattern", select Image Output System.
i. Image Output System
ii. Paper (Simplex/Duplex)
iii. Paper Tray/Size
iv. Paper Type
v. Screen Type
vi. Color Mode
vii. Set the number of prints to output and select Start.
Test Patterns
For details on the test pattern generation location and output path,
Pattern
Number Pattern Name
1 IIT Analog Gradation Ch1-
6-RGB - 300 lines (3C)
2 IIT Analog Gradation Ch1,
2-R - 300 lines (K)
3 IIT Analog Gradation Ch3,
4-G - 300 lines (K)
4 IIT Analog Gradation Ch5,
6-B - 300 lines (K)
5 IIT Analog Gradation Ch1-
R - 300 lines (K)
6 IIT Analog Gradation Ch2-
R - 300 lines (K)
7 IIT Analog Gradation Ch3-
G - 300 lines (K)
8 IIT Analog Gradation Ch4-
G - 300 lines (K)
1/05
dC391 Edit Pad , dC612 Color Test Pattern Print
6-119
Entering the Service Diagnostic Mode
Table 1:
Table 1 Test Patterns
Description Remarks
3C color gradation PG PreIPS (Image Process-
with all CCD RGB Odd/ ing)
Even data
K-color gradation PG with PreIPS (Image Process-
CCD R Odd/Even data ing)
K-color gradation PG with PreIPS (Image Process-
CCD G Odd/Even data ing)
K-color gradation PG with PreIPS (Image Process-
CCD B Odd/Even data ing)
K-color gradation PG with PreIPS (Image Process-
CCD R Odd data ing)
K-color gradation PG with PreIPS (Image Process-
CCD R Even data ing)
K-color gradation PG with PreIPS (Image Process-
CCD G Odd data ing)
K-color gradation PG with PreIPS (Image Process-
CCD G Even data ing)
General Procedures