Xerox DocuColor 12/DCCS50 Service Manual page 368

Figure 2 Removing the Joint
5. Remove the Duplex Belt 1 (Figure
1. Remove the E-clips (2).
2. Move the bearings (2) in the direction of the arrow.
3. Remove the Aligner Rolls 2/3.
4. Remove the Duplex Belt 1.
Repairs and Adjustments
REP 2.21.3
3).
Figure 3 Removing the Duplex Belt 1
6. Remove the Duplex Belt 2
1. Remove the E-clip.
2. Move the bearing in the direction of the arrow.
3. Remove the Aligner Roll 1.
4. Remove the Duplex Belt 2.
1/05
4-44
manuals4you.com manuals4you.com
(Figure 4).
DocuColor 12/DCCS50
Reissue