Rep 12.10.1 Platen Belt - Xerox DocuColor 12/DCCS50 Service Manual

REP 12.10.1 Platen Belt

Parts List on PL 12.10
Removal
NOTE: After replacing the Platen Belt, reset the HFSI counter. Enter the
Diag. Screen (NVM 005-805).
Turn power off and disconnect the power plug.
1. Remove the Front Cover (PL 12.1).
2. Remove the Document Transport (Figure
NOTE: Remove the Document Transport by holding it in the rear.
1. Loosen the screws (3).
2. Remove the Document Transport.
Figure 1 Remove the Document Transport
Document Handler rises quickly when Platen Belt is removed.
3. Remove the Platen Belt (Figure 2).
1. Loosen the screws (2).
Reissue
DocuColor 12/DCCS50
dC135 HFSI Counters
WARNING
1).
CAUTION
2. Move the shaft support in the direction of the arrow.
3. Remove the Platen Belt.
Figure 2 Remove the Platen Belt
Installation
1. Install the parts in the reverse order of the disassembly, but keep the following in mind:
1/05
4-173
Repairs and Adjustments
REP 12.10.1