Xerox DocuColor 2240 Quick Start Manual
Hide thumbs
Also See for DocuColor 2240:
- Service manual (1489 pages) ,
- User manual (371 pages) ,
- Troubleshooting manual (28 pages)
Advertisement
Quick Links
Fig. 1
Select Access.
Fig. 2
Enter the System Administrator Password from the Numeric Keypad and
then press Confirm. (See Machine Administration User Guide for
default password)
Fig. 3
Select
System
Settings.
Fig. 4
Select
System
Settings.
Fig. 5
Select
Scan Mode
Settings.
Fig. 6
Select the appropriate settings button to make changes as needed. After
changes are completed or if no changes are needed continue to Fig. 7
*Refer to the charts of the Administration Settings- Scan Mode Part
2 of 2 pamphlet for settings value.
Administration Setting Scan Mode - 1 of 4
Fig. 7
Select Close.
Fig. 8
Select Exit.
Fig. 9
Changes are completed.
Advertisement
Related Manuals for Xerox DocuColor 2240
Summary of Contents for Xerox DocuColor 2240
- Page 1 Fig. 4 Fig. 7 Select System Settings. Select Close. Fig. 1 Select Access. Fig. 2 Fig. 5 Fig. 8 Enter the System Administrator Password from the Numeric Keypad and Select Scan Mode Settings. Select Exit. then press Confirm. (See Machine Administration User Guide for default password) Fig.
-
Page 2: Quick Start Guide
Quick Start Guide Administration Setting Scan Mode - 2 of 4... -
Page 3: Basic Scanning Presets
Basic Scanning Presets Scan Defaults Output Size Defaults 1. to 3. reduce/Enlarge 2 to 4 button (The defaults are as 8. Original Type (The default setting is 0) Output Size 1 to 8 (The default settings are as follows in order follows: 2 for the 2 tray from the top, 4 for the 3 tray, and 7... - Page 4 Others 3. Memory Full Procedure (The default setting is 0) Setting Description Disabled (Discard stored documents) Quick Start Guide ble stored data 4. Maximum Stored Pages (The default setting is 999) Setting Description 1 to 999 The maximum number of stored pages for scanning.