2. Remove the Cartridge Guide.
3. Remove the indicator.
Figure 2 Remove the Indicator
6.
Remove the 2nd BTR
(Figure
3).
1. Remove the screw.
2. Remove the screw.
3. Pull out the ground wire from the hole.
4. Disconnect the connector.
5. Remove the 2nd BTR.
Repairs and Adjustments
REP 7.9.1
Installation
Be sure to rotate the drive shaft on the 2nd BTR to move the BTR Roll to the down position
before closing the Drawer Assembly.
1.
Reinstall the parts in the reverse order of disassembly.
1/05
4-110
manuals4you.com
manuals4you.com
Figure 3 Remove the 2nd BTR
CAUTION
DocuColor 12/DCCS50
Reissue