Rep 7.10.1 2Nd Btr Roll - Xerox DocuColor 12/DCCS50 Service Manual

REP 7.10.1 2nd BTR Roll

Parts List on PL 7.10
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Remove the 2nd BTR (REP 7.9.1).
3. Remove the cover (Figure 1).
1. Remove the wire from the hooks (3).
2. Remove the screw.
3. Remove the cover.
4. Remove the screws (3).
5. Remove the plate grounds (2).
Figure 1 Remove the Cover
4. Remove the Inlet Plate (Figure 2).
1. Remove the screw.
2. Remove the wire from the hook.
3. Remove the Inlet Plate.
Reissue
DocuColor 12/DCCS50
WARNING
Figure 2 Remove the Inlet Plate
5. Remove the gears (Figure 3).
1. Remove the E-clips (2).
2. Remove the gears (2).
1/05
4-111
Repairs and Adjustments
REP 7.10.1