Rep 5.3.1 Drum Unit - Xerox DocuColor 12/DCCS50 Service Manual

REP 5.3.1 Drum Unit

Parts List on PL 5.3
Removal
Turn power off and disconnect the power plug.
NOTE: When removing the Drum Unit, do not expose the Drum to direct sunlight or strong
light.
NOTE: Do not touch the Drum surface.
1. Open the Front Door.
2. Turn the IBT Handle to the left.
3. Pull the handle and pull out the Drum Unit
1. Pull the handle.
2. Pull out the Drum Unit.
Figure 1 Pull out the Drum Unit
Repairs and Adjustments
REP 5.3.1
WARNING
(Figure 1).
Installation
NOTE: When installing the Drum Unit, match the rails with groove A
1. After reinstallation of the parts, perform the following steps.
a. After replacing the Drum Unit, make sure that the Image Quality is correct
Image Quality Troubleshooting Entry
b. If the Image Quality is not correct, perform the MAX set-up
1/05
4-68
manuals4you.com manuals4you.com
(Figure
Figure 2 Reassembly
RAP).
(ADJ 9.1.1).
DocuColor 12/DCCS50
2).
(IQ 1
Reissue