Rep 3.3.1 Carriage Cables - Xerox DocuColor 12/DCCS50 Service Manual

Figure 3 Removing the CCD PWB
Installation
NOTE: Ensure that the two locating holes line up with the semi-perf locating pin.
1. Reinstall the parts in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50

REP 3.3.1 Carriage Cables

Parts List on PL 3.3
Removal
NOTE: This page describes how to remove the Rear Carriage Cable.
Turn power off disconnect the power plug.
NOTE: Do not replace both cables at the same time. Remove the front and rear cables sepa-
rately.
1. Remove the Platen Cover or DADF
2. Remove the Platen Glass (REP
3. Platen machines: Remove the Blind Cover
4. Remove the Top Cover (PL 11.1 Item
5. Platen machines: Remove the Registration Guide
1. Remove the screws (2).
2. Remove the Registration Guide.
Figure 1 Removing the Registration Guide
6. DADF machines: Remove the registration gate and plate
1/05
4-55
WARNING
(REP 12.1.1).
3.1.1).
(PL 11.1 Item 7).
1).
(Figure 1).
(Figure 2).
Repairs and Adjustments
REP 3.2.1, REP 3.3.1