11-914 Bin 4 Full Stack Rap; 11-915 Bin 5 Full Stack Rap - Xerox DocuColor 12/DCCS50 Service Manual

11-914 Bin 4 Full Stack RAP

The Control Logic detected that Bin 4 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D,
Stack RAP to troubleshoot this Fault Code.
Initial Actions
• Refer to BSD11.6 for the following procedure.
• Ensure that Bin 4 is empty
Procedure
Enter dC330 011-284 Bin 4 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of the sensor.
Y N
Replace the Mail Box Control PWB
Check the Bin 4 Full Sensor for intermittent operation. If the problem continues, replace the
Mail Box Control PWB (PL 13.10).
Reissue
DocuColor 12/DCCS50
11-914 Bin 4 Full
(PL 13.10).

11-915 Bin 5 Full Stack RAP

The Control Logic detected that Bin 5 is full.
NOTE: If this machine has a Finisher/Sorter Accessory, go to Section 8D,
Stack RAP to troubleshoot this Fault Code.
Initial Actions
• Refer to BSD11.6 for the following procedure.
• Ensure that Bin 5 is empty
Procedure
Enter dC330 011-285 Bin 5 Full Sensor. Press Start. Manually move the actuator in and out
of the sensor The display Changes from H to L to H as the actuator is moved in and out
of the sensor.
Y N
Replace the Mail Box Control PWB
Check the Bin 5 Full Sensor for intermittent operation. If the problem continues, replace the
Mail Box Control PWB (PL 13.10).
1/05
11-914 Bin 4 Full Stack RAP, 11-915 Bin 5 Full Stack
2-209
11-915 Bin 5 Full
(PL 13.10).
Status Indicator RAPs