Table of Contents
Advertisement
Color Balance Setup (dC919 UI Diagnostics) (IIT installed
machine only)
Purpose
•
To correct the YMCK Color Balance.
•
Take a 4C copy in the Photo Mode. Visually check the copy. Reset the YMCK Color Bal-
ance Value.
NOTE: Run this function at the customer's request, after the automatic gray-scale is corrected.
NOTE: The Hi-Light Setup must be performed before running this function.
NOTE: This section only describes the setup in the UI-Diagnostics. For details, see
light Setup (dC918 UI
Diagnostics).
Procedure
1.
Enter the UI Diagnostics Mode. Refer to
2.
Select the following:
Max Setup→Color Balance Setup.
3.
Place Test Pattern (82E10810) on the Platen Glass. Select the Start Button.
Take a PG Print in the following mode:
a.
APS, 100%, Normal paper, LUTON
NOTE: If each color has no defects in density, go to Step 4.
If there are defects in color density, adjust the color balance for colors with defects using
the UI.
4.
Select Close to return to the Max Setup Screen.
General Procedures
Color Balance Setup (dC919 UI Diagnostics) (IIT in-
IOT High-
How to Enter/Exit the UI (IOT)
Diagnostics.
1/05
6-142
manuals4you.com
manuals4you.com
Reissue
DocuColor 12/DCCS50
Advertisement
Table of Contents
Troubleshooting
