Xerox DocuColor 12/DCCS50 Service Manual page 507

Figure 2 Remove the Gear
4. Remove the Cam (Figure 3).
1. Remove the E-clips (3).
2. Remove the reflector.
3. Remove the bearings (2).
4. Remove the lever.
5. Remove the cam.
Reissue
DocuColor 12/DCCS50
Figure 3 Remove the Cam
Installation
This illustration shows installation for the rear side. Install the gear and cam for the front in the
same way as for the rear.
1. Install the gear and cam. Align the holes in the two parts
1/05
4-183
(Figure 4).
Repairs and Adjustments
REP 13.13.2