Dc Quick (Code Number List) - Xerox DocuColor 12/DCCS50 Service Manual

Table 1 Machine Data displayed at Service Entry
Heading Contents
Machine Data Product Code
Serial Number
Total Copies
Copies Since Last Call
Software Version
Non-Zero Jams ID, Description, Occurrences
HFSI Requiring Replacement ID, Description, Threshold,
Count.
Faults in Progress (Current ID, Description, Primary
Faults)
General Procedures
Entering the Service Diagnostic Mode using the PWS,

DC Quick (CODE Number LIST)

Once in the Service Mode, dC Routines can be selected by dC Number or by selecting the
appropriate tabs starting at the Service Entry Screen.
Description
Procedure
Displays a 3-digit code allo-
cated to each machine to
1.
identify the machine.
Displays a 6-digit number (0-
2.
9) allocated to each machine
type to identify the machine.
Displays the total number of
copies/prints
Displays the total number of
copies/prints since the last
dC Number
CSE visit (complete closeout).
100
Displays current IOT S/W Ver-
sion
Displays the Jams that have
occurred since the last com-
plete closeout.
Displays the component(s)
(HFSI) that has exceeded the
life Threshold).
Displays current (active) faults
in the machine.
110
118
120
122
129
131
1/05
6-20
manuals4you.com manuals4you.com
Enter the Service Diagnostics Mode. Refer to
using the PWS.
Using the DC Quick pull-down menu (upper-right side of Diagnostics Service Entry
Screen), select the desired dC routine.
Table 1 is a complete list of dC Routines that are available from the DC Quick pull-down
menu.
Table 1 dC Routines
Name
Service Entry Screen
CRU data
Jam Counter
Fail Counters
Shut-down History
Automatic Setting: Adjust System
Registration
NVM access: Read/Write NVM
Entering the Service Diagnostic Mode
Description
1. Displays the Service Routine
Tabs.
2. Lists Active Faults
3. Lists the item names of the
HFSIs that exceeded life expect-
ancy.
4. Lists the jams that have
occurred since the last Call
Closeout.
5. Displays IOT S/W Version.
Lists current and last 2 Xerographic
CRU data.
Displays the following: Number of jam
events since the last Complete Close-
out (performed in Service Exit) to the
current Number of jams.
Displays the following: Number of
Fault events after the last Complete
Closeout (performed in Service Exit)
to the current copy count.
1. Displays the history in three cat-
egories: Document Jam, Paper
Jam and Other Fault.
2. Displays the most recent 40
Faults (without categorizing)
The IOT lead registration and side
registration are matched.
You can reference or set/change the
NVM data.
Reissue
DocuColor 12/DCCS50