Xerox DocuColor 12/DCCS50 Service Manual page 453

4. Remove the screw.
5. Remove the bracket.
Figure 2 Remove the Bracket
6. Remove the sensor (Figure 3).
1. Remove the screw.
2. Remove the bracket.
3. Remove the screw.
4. Remove the sensor.
Reissue
DocuColor 12/DCCS50
Figure 3 Remove the Sensor
7. Remove the EXT-H/R Retract Motor
1. Disconnect the connector.
2. Remove the screws (3).
3. Remove the stud screw.
4. Remove the bracket.
5. Remove the screws (2).
6. Loosen the set screw.
7. Remove the gear.
8. Remove the motor.
1/05
4-129
(Figure 4).
Repairs and Adjustments
REP 8.4.1