Rep 2.17.1 Vacuum Transport - Xerox DocuColor 12/DCCS50 Service Manual

Figure 2 Removing the Pre-Regi. Roll
Installation
1. Reinstall the parts in the reverse order of disassembly.
Reissue
DocuColor 12/DCCS50

REP 2.17.1 Vacuum Transport

Parts List on PL 2.17
Removal
Turn power off and disconnect the power plug.
1. Open the Front Door.
2. Push the lever down and pull out the drawer assembly.
3. Pull the drawer assembly out to a maintenance position
1. Push the stoppers on both sides.
2. Pull out the Drawer Assembly.
Figure 1 Opening the Drawer
4. Remove the Vacuum Transport
1. Remove the screws (3).
2. Remove the Vacuum Transport.
1/05
4-39
WARNING
(Figure 1).
(Figure 2).
Repairs and Adjustments
REP 2.16.2, REP 2.17.1