Xerox DocuColor 12/DCCS50 Service Manual page 792

Table 2 Output Component Control Codes
ID Description In_Out
011-086 BIN 5 GATE SOLE- Output
NOID
011-087 BIN 6 GATE SOLE- Output
NOID
011-088 BIN 7 GATE SOLE- Output
NOID
011-089 BIN 8 GATE SOLE- Output
NOID
011-090 BIN 9 GATE SOLE- Output
NOID
011-091 BIN 10 GATE SOLE- Output
NOID
011-093 OCT OFFSET MOTOR Output
FRONT
General Procedures
dC330 Component Control
Module_I
Smart Help D
Switch the 5 Bin Gate to the 5 Bin Sorter
Tray direction.
Cannot run with the 2 to 4, 6 to 10
Bin Gate Solenoids (011-083
through 011-085, 011-087 through
011-091).
Switch the 6 Bin Gate to the 6 Bin Sorter
Tray direction.
Cannot run with the 2 to 5, 7 to 10
Bin Gate Solenoids (011-083
through 011-086, 011-088 through
011-091).
Switch the 7 Bin Gate to the 7 Bin Sorter
Tray direction.
Cannot run with the 2 to 6, 8 to 10
Bin Gate Solenoids (011-083
through 011-087, 011-089 through
011-091).
Switch the 8 Bin Gate to the 8 Bin Sorter
Tray direction.
Cannot run with the 2 to 7, 9, 10 Bin
Gate Solenoids (011-083 through
011-088, 011-090, 011-091).
Switch the 9 Bin Gate to the 9 Bin Sorter
Tray direction.
Cannot run with the 2 to 8,10 Bin
Gate Solenoids (011-083 through
011-089, 011-091).
Switch the 10 Bin Gate to the 10 Sorter
Bin Tray direction.
Cannot run with the 2 to 4, 6 to 10
Bin Gate Solenoids (011-083
through 011-085, 011-087 through
011-091).
Moves the OCT to the front direc- Sorter
tion and stops at the OCT Offset
Position.
(CW) Moves the OCT to the front
direction and stops 20 msec after
the OCT Offset Position Sensor
detects it.
Table 2 Output Component Control Codes
ID Description
011-095 OCT OFFSET MOTOR
BACK
012-005 MBX DRIVE MOTOR
012-010 DEC MOTOR ON/OFF
60
012-011 DEC MOTOR ON/OFF
130
012-012 DEC MOTOR ON/OFF
220
012-013 DEC MOTOR ON/OFF
350
012-020 FINSHER TRANS-
PORT MOTOR
012-024 EJECT MOTOR FOR-
WARD
012-025 EJECT MOTOR
REVERSE
012-026 EJECT CLAMP AND
OFFSET MOTOR UP/
DOWN
012-027 EJECT CLAMP AND
OFFSET MOTOR F/R
1/05
6-112
manuals4you.com manuals4you.com
In_Out Smart Help
Output Moves the OCT to the rear direction
and stops at the OCT Offset Posi-
tion.
(CCW) Moves the OCT to the front
Direction and stops 20 msec after
the OCT Offset Position Sensor
detects it.
Cannot run with Offset Position
Sensor ON.
Cannot run with OCT Offset Motor
Front.
Output Low: On
Drives MBX Drive Motor
Output Low: On
Drives DEC Paper Transport Roll at
60mm/s (actually 130mm/s)
Output Low: On
Drives DEC Paper Transport Roll at
130mm/s.
Output Low: On
Drives DEC Paper Transport Roll at
220mm/s.
Output Low: On
Drives DEC Paper Transport Roll at
130mm/s.
Output Low: On
Drives Finisher Transport Motor.
Output Not measurable
Drives Eject Roll forward.
Note: Not measurable in field due to
24V Clock.
Output Not measurable
Drives Eject Roll backward.
Note: Not measurable in field due to
24V Clock.
Output High: On
Drives Eject Roll up/down. (500ms)
Output High: On
Drives Eject Roll to front/rear.
(500ms)
DocuColor 12/DCCS50
Module_I
D
Sorter
Finisher
Finisher
Finisher
Finisher
Finisher
Finisher
Finisher
Finisher
Finisher
Finisher
Reissue