Adj 12.3.1 Left/Right Counter Balance - Xerox DocuColor 12/DCCS50 Service Manual

3. Repeat check steps 1 - 5 and adjustment steps 1- 2 until the value is within the allowed
range (B=10mm ± 0.6mm).
Repairs and Adjustments
ADJ 12.1.1, ADJ 12.3.1

ADJ 12.3.1 Left/Right Counter Balance

Parts List on PL 12.3
Purpose
To correct the spring pressure on the Left/Right Counter Balance.
Check
1. Operate the DADF so that it closes from the Open state. Check whether the DADF
remains in the open position when fully raised and closes under its own weight from a
height of 100 ± 50mm
(Figure
Figure 1 Checking the Counter Balance
Adjustment
Turn power off and disconnect the power plug.
1. Remove the rear cover PL
2. Adjust the Left/Right Counter Balance
NOTE: If item b in the check steps is adjusted, adjust only the Left Counter Balance (as a
rule). (This is because floating may occur at the right side due to DADF rigidity.)
a. Rotate in the A direction for stronger spring pressure.
b. Rotate in the B direction for weaker spring pressure.
1/05
4-216
manuals4you.com manuals4you.com
1).
WARNING
12.1.
(Figure 2).
DocuColor 12/DCCS50
Reissue