Rep 7.6.3 Back-Up Roll - Xerox DocuColor 12/DCCS50 Service Manual

REP 7.6.3 Back-up Roll

Parts List on PL 7.6
Removal
NOTE: If replacing the Back-up Roll, clear the HFSI counter. Enter the
List Diag. Screen (009-808).
Turn power off and disconnect the power plug.
NOTE: When removing the IBT, make sure that the IBT Belt does not touch any other part.
NOTE: Carefully place the removed IBT on a flat surface (covered with a sheet of paper).
1. Remove the IBT (REP 7.1.1).
2. Remove the IBT Cleaner (REP 7.1.2).
3. Remove the IBT Belt (REP 7.5.1).
4. Remove the Back-up Roll (Figure 1).
NOTE: Do not touch or hold the rubber layer of the Back-up Roll.
1. Remove the screw.
2. Remove the plate.
3. Remove the Back-up Roll.
Repairs and Adjustments
REP 7.6.3
dC135 HFSI Counter
WARNING
Figure 1 Remove the Back-up Roll
Installation
1. Reinstall the parts in the reverse order of disassembly.
1/05
4-108
manuals4you.com manuals4you.com
Reissue
DocuColor 12/DCCS50