Rep 2.23.2 Inverter 2 - Xerox DocuColor 12/DCCS50 Service Manual

REP 2.23.2 Inverter 2

Parts List on PL 2.23
Removal
Turn power off and disconnect the power plug.
1. Remove the following parts:
a. Right Upper Cover (PL 11.2 Item
b. Exit Tray (PL 2.23 Item 11)
2. Open the Inverter 2.
3. Remove the Inverter Cover (Figure
1. Remove the screws (3).
2. Lift the Inverter Cover and remove it.
Figure 1 Removing the Inverter Cover
4. Remove the Inverter 2 (Figure 2).
1. Disconnect the connector.
2. Release the clamps (2) and remove the wire.
3. Remove the Inverter 2.
Reissue
DocuColor 12/DCCS50
WARNING
1)
1).
Figure 2 Removing the Inverter 2
NOTE: Ensure that the 5 tabs on the cover correctly latch into the Inverter before tighten-
ing the mounting screws.
5. Reinstall the parts in the reverse order of disassembly.
1/05
4-47
Repairs and Adjustments
REP 2.23.2