Rep 13.5.2 Bin Tray 1 - Xerox DocuColor 12/DCCS50 Service Manual

REP 13.5.2 Bin Tray 1

Parts List on PL 13.5
Removal
Turn power off and disconnect the power plug.
1. Remove the following parts:
a. Stopper (PL 13.1)
b. Rear Cover (PL 13.4)
c. Top Cover (PL 13.4)
d. Left Cover (PL 13.4)
2. Remove the spring (Figure 1).
1. Remove the spring.
2. Remove the belt from the pulley.
Figure 1 Remove the Spring
3. Remove the ACT Cover (Figure 2).
1. Remove the screw.
2. Remove the Vertical LED.
3. Remove the screws (3).
4. Remove the ACT Cover.
Reissue
DocuColor 12/DCCS50
WARNING
Figure 2 Remove the ACT Cover
4. Remove the Bin Tray Pawl from the gate
1/05
4-177
(Figure 3).
Repairs and Adjustments
REP 13.5.2