Rep 9.2.3 Half Tone Pwb - Xerox DocuColor 12/DCCS50 Service Manual

REP 9.2.3 Half Tone PWB

Parts List on PL 9.2
Removal
Turn power off and disconnect the power plug.
1. Open/close the IIT (REP 3.1.2).
2. Remove the Half Tone PWB Cover
1. Remove the screws (2).
2. Open the Half Tone PWB Cover.
Figure 1 Remove the Half Tone PWB Cover
3. Remove the VSEL BT PWB (Figure
1. Disconnect the connectors (3).
2. Remove the screws (2).
3. Remove the screws (2).
4. Remove the VSEL BT PWB.
Reissue
DocuColor 12/DCCS50
WARNING
(Figure 1).
2).
Figure 2 Remove the VSEL BT PWB
4. Disconnect the connectors (Figure
1. Disconnect the connectors (5).
1/05
4-141
3).
Repairs and Adjustments
REP 9.2.3