Rep 6.6.1 Development Housing - Xerox DocuColor 12/DCCS50 Service Manual

REP 6.6.1 Development Housing

Parts List on PL 6.6
Removal
NOTE: After replacing the Development Housing, reset the HFSI counter. Enter the
HFSI Counters Diag. Screen:
a. Yellow: location NVM 009-851
b. Magenta: location NVM 009-852
c. Cyan: location NVM 009-853
d. Black: location NVM 009-850
Turn power off and disconnect the power plug.
Do not put the Developer or Developer Unit into a fire. If the Developer or Developer Unit
is placed into a fire, it may explode and cause injury.
1. Remove the Right Upper Cover (PL
2. Disconnect the connectors (Figure
1. Loosen the screws (2).
2. Disconnect the connectors (3).
3. Release the clamps (2) and remove the wire.
4. Pull out the connector from the hole.
Reissue
DocuColor 12/DCCS50
WARNING
WARNING
11.2).
1).
dC135
Figure 1 Disconnect the Connectors
3. Hook the bracket hook s
1. Hook the hooks (2).
1/05
4-87
(Figure 2).
Repairs and Adjustments
REP 6.6.1