Output Parameters (Ec Circle Search); Key Points For Test Measurement And Adjustment (Ec Circle Search) - Omron FH-3 Series Reference Manual

Output Parameters (EC Circle Search)

Specify how to treat the coordinates to be output to the external device as measurement results. This item can
be changed if necessary. Normally, the factory default value will be used.
Important
• After setting up the measurement parameters, changing the output parameters will cause measurement results to vary
accordingly. If the output parameters have been changed, re-specify the measurement, too.
1
Click [Output parameter] in the Item Tab area.
2
Specify a value for the items.
Setting item
Output coordinates
Calibration
Reflect to the overall
judgement
Note
• For output coordinates and calibration, Reference: "Appendixes Measurement Mechanism Handling Coordinates" in
the "Vision System FH/FZ5 Series User's Manual (Z365)"

Key Points for Test Measurement and Adjustment (EC Circle Search)

The following content is displayed in the "Detail result" area as text.
Displayed item
Judge
Position X
Position Y
Evaluation
Radius
Search count
152
EC Circle Search
Set value
[Factory default]
As measurement results, select whether to output coordinate values
• [After scroll]
to external devices before or after the position deflection correction is
• Before scroll
applied.
Select whether to reflect the calibration in the values output to the
• [OFF] external device as measurement results.
• ON ON: Output the coordinates converted into actual dimensions.
OFF: Output the camera coordinate values.
• [ON] Enables choosing whether or not the judgement results of this
• OFF processing unit is reflected in the scene overall judgment.
Judgement result
X coordinate of the position where the model is detected
Y coordinate of the position where the model is detected
Circle evaluated value of circles detected
Radius of circles detected
Quantity of circles detected
Description
Description
FH/FZ5 Processing Item Function Reference Manual