Using The Parallel Output Unit (Sold Separately); Connecting The Parallel Output Unit; Layout Of Output Terminals - Omron ZG2 Series User Manual

Using the Parallel Output Unit (sold separately)

The Parallel Output Unit (ZG-RPD1) (sold separately) can be used to output
measurement values or judgment results to external devices at high speed.
Measurement values are converted to 16-bit binary data before they are output.

Connecting the Parallel Output Unit

Layout of Output Terminals

1PIN to 16PIN
Parallel output
Signal name: D0 to D15
17PIN
Gate signal
Signal name: GATE
18PIN
Unused
138
Using the Parallel Output Unit (sold separately)
1
2
Pin No.
1
Mount the Parallel Output Unit on
a DIN track.
2
Connect the connector to the RS-
232C connector on the ZG2-WDC.
Signal name Bit assignment Description
1 D0 b0
2 D1 b1
3 D2 b2
4 D3 b3
5 D4 b4
6 D5 b5
7 D6 b6
8 D7 b7
9 D8 b8
10 D9 b9
11 D10 b10
12 D11 b11
13 D12 b12
14 D13 b13
15 D14 b14
16 D15 b15
17 GATE -
18 - -
Binary data output pin
GATE si
Unused
ZG2 User's Manual