Honda Acura NSX 1991 Service Manual page 327

Removal
1.
Disconnect the clutch pipe from the slave cylinder.
CAUTION:
l
Avoid spilling
brake
faces, as it may damage the finish.
to prevent brake fluid from coming out.
2. Remove the slave cylinder from the clutch housing.
BOOT
Remove and check for signs of leaking
or deterioration.
fluid on the painted sur-
S L A V E
CYLINDER
ASSEMBLY
Installation
Install the slave cylinder assembly on the clutch
1 .
SLAVE CYLINDER ASSEMBLY
22 Nom (2.2 kg-m.
\ 16 lb-ft)
(Molybdenum
2. Bleed the clutch hydraulic system:
the hose in a container of brake fluid.
the master cylinder, then slowly pump the
clutch pedal until no more bubbles appear at the
bleeder hose.
l
10 Nom (1 .O kg-m,
8 lb-ftl