Fuel Supply System
1. Raise the car.
2. Remove the drain bolt and drain the fuel into an approved container.
3. Remove the center rod (Section 5).
4. Disconnect the M/T shift cable and M/T clutch cable or A/T shift cable from the transmission (Section 14).
5. Disconnect the 6P connector from the fuel tank.
6. Disconnect the hoses.
CAUTION:
7. Place a jack, or other support, under the tank.
8. Remove the strap bolts and nuts, and let the straps fall free.
9. Remove the fuel tank.
NOTE: The tank may stick on the undercoat applied to its mount. To remove, carefully pry it off the mount,
10. Install a new washer on the drain bolt, then install parts in the reverse order of removal.
TANK STRAPS
1 I-108
MOUNTING BOLT
39
29
lb-ft)
FILTER
DRAIN BOLT
50 Nom (5.0
21 Nom (2.1 kg-m,
kg-m,
36 lb-ft)