Table of Contents
Advertisement
General Description, Work Routines and Operation
2.5.5
System Start
After manual or automatic switch-on the chemical solutions and the dryer are heated up.
During this phase various windows screen pop up on the screen; they indicate:
progress of warm-up (actual and nominal temperatures of solutions and dryer)
–
remaining time until the individual modules are ready for operation
–
various information about the progress of the machine initialization
–
error messages, if applicable
–
Troubleshooting
(see
Chapter 7,
The machine is ready for operation after the chemical solutions and the dryer have
reached the nominal temperatures.
2.5.6
User Login
If a standard user with automatic login has been defined in the machine settings
Defining a Standard User
(see
warm-up the start screen is displayed (see
Otherwise the Login screen is displayed.
If an operator, who has to enter his or her Password, has been defined as standard user in
the machine settings, the name is already shown but the password must still be entered.
If no operator has been entered as standard user in the machine settings, the user name
must be selected and the password must be entered:
2-22
2005-05-01 / PN 04092_01
, for remedies for occurring errors)
in Chapter 4), user login is not necessary here: After the
next section
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Start Screen
).
Select user name if necessary
Type the password if necessary
The start screen will be displayed.
AgfaPhoto
Advertisement
Table of Contents
