Table of Contents
Advertisement
d-lab.2, d-lab.2plus, netlab.2plus: Operation
7.3
Activating Help for Error Messages
7.4
Problems During Scanning
Applies only to d-lab.2/2plus
1
2
3
G_GG212_2 (Fig. shows d-lab.2)
1 ON button
2 Timer lamp
3 Film stop key
AgfaPhoto
Help texts for error messages can be called up as
follows:
Press the ? button, then press Error help
index:
A list with error messages in alphabetic
order is displayed.
Press the error message:
The help text is displayed.
Press the film stop key (3).
The film transport stops during scanning. The
power supply to all motors of the film drive
is immediately switched off. The Reset
popup is shown on the screen with the
button Yes.
CAUTION!
Be sure to wait with the confirmation
until the paper transport in the Printer is
empty.
Printer does not work (no noise).
–
As an alternative, press
–
position of the prints by means of the Info
function.
Otherwise there is a risk of paper jam.
Only when all prints are in the Paper
Processor press Yes to trigger a reset.
2005-05-01 / PN 04092_01
Troubleshooting
7
and check the
i
7-3
Advertisement
Table of Contents
