Table of Contents
Advertisement
Maintenance
8.3.2
Cleaning the Drive Rollers in the Film Carrier
Applies only to d-lab.2/2plus
Purpose:
To avoid film transport problems.
Tools and/or material
– Cleaning strips (order number CM+9.8506.1340.1)
– Water
There are two alternatives to remove the deposits on the drive rollers left and right of the
film carrier.
8.3.2.1 In the Running Machine
dlab2520
8.3.2.2 When the Machine is Off
dlabr066
8-10
2005-05-01 / PN 04092_01
d-lab.2, d-lab.2plus, netlab.2plus: Operation
Press in this order:
Print mode
Manual positioning
Dip the cleaning strip in water and wipe off
the water.
Feed the cleaning strip just like a film:
the cleaning strip is pulled in.
Press Eject:
The cleaning strip is ejected.
Repeat the procedure until both rollers are
free of deposits.
Press in this order:
End of work
Shutdown
Once the machine has shut down: remove
mirror box, film carrier, and film takeup.
Turn the rollers TR4 and TR5 by hand and
clean them with a damp cloth (water).
Also clean the hinged drive rollers with a
damp cloth (water).
CAUTION!
Do not use solvents or cleaning
substances containing solvents.
Clean the surface of the scanner filter.
Insert film take-up, film carrier, and mirror
box again.
AgfaPhoto
Advertisement
Table of Contents
